Dalene Flooring
get a coupon
Want some added savings?
Take a look at Dalene's monthly coupon.
product: carpet flooring
more for the home
hardwood
ceramic
area rugs
vinyl
laminate
wood floor refinishing

carpet spot & stain removal by type


Home > For The Home > Carpet Flooring > Learn More About Carpet > Carpet Spot & Stain Removal By Type

asphalt carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

beer carpet spots & stains

[Back to top]

  1. Blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

berries carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3.  Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

blood carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3.  Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25aWarranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

butter carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

candle wax carpet spots & stains

[Back to top]

  1. Scrape off excess wax.
  2. Cover with brown paper.
  3. Apply warm iron until remaining wax is absorbed. Be sure paper is large enough to cover the stained area. Take care never to touch the iron to the carpet as the fiber might melt.
  4. Change paper or rotate to clean area and repeat until all material is absorbed.

OR:

  1. Scrape or blot up excess spill.
  2. Freeze with ice cubes.
  3. Shatter with blunt object like the back of a large spoon.
  4. Vacuum chips away before they melt.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

candy carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty

catsup carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

chalk carpet spots & stains

[Back to top]

  1. Vacuum away as much as possible.
  2. Loosen remaining material by tapping with a scrub brush or toothbrush. Tap with brush, do not scrub.
  3. Vacuum.
  4. Apply dry powder cleaner.
  5. Tap with brush to work powder into carpet tufts. Do not scrub.
  6. Let powder dry 1 hour.
  7. Vacuum.
  8. Repeat dry powder application if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

chewing gum carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Freeze with ice cubes.
  3. Shatter with blunt object like the back of a large spoon.
  4. Vacuum chips away before they melt.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

chocolate carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

coffee carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

cooking oil carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak Solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

dyes carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

excrement carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners such as.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

foundation makeup carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Blot-finish with weighted pad of towels

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

fruit juice carpet spots & stains

[Back to top]

  1. Blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum

OR:

  1. Blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

furniture polish carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

grease - food carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

grease - auto carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

glue - white carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

glue - hobby carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
  2. Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
  3. Repeat above -soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

ice cream carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

ink - ball point pen carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

ink - india carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

ink - marking pen spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

artificially flavored juice drinks spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

kool - aid carpet spots & stains

[Back to top]

  1. Blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

lemonade carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well
  9. Apply dry powder cleaner (see "Cleaning Solutions")
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

lipstick carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25aWarranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

mascara carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

mayonnaise carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Mercurochrome carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Methiolate carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Milk carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Mixed Drinks (Liqueurs) carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Mud carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Mustard carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

nail polish carpet spots & stains

[Back to top]

  1. Apply nail polish remover (non-oily type)-use cotton swab to apply to the spill. Don't wet through to carpet backing.
  2. Pick up softened materials -use clean white paper towel and push toward the center of the spill to avoid spreading.
  3. Repeat above-soften and carefully remove a layer of the spill each time. Haste may spread the stain and/or damage the carpet.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Paint - Latex carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Paint - oil carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

pet food carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

Papier-Mâché carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

shoe polish carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

shortening carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.
* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty

soft drink carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.
Cleaning Solutions to have on hand:
  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

tar carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

tea carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Apply water with damp sponge.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

urine - dry carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

urine - fresh carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

vomit carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply dry baking soda.
  3. Scrape and vacuum.
  4. Apply water using a damp sponge to rinse remaining baking soda. Don't over wet.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Rinse with water as above.
  8. Blot-don't rub-dry well.
  9. Apply dry powder cleaner (see "Cleaning Solutions").
  10. Vacuum.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners such as.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

wine - red carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel, and leave 3-5 minutes.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments.
    Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

wine - white carpet spots & stains

[Back to top]

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply water with damp sponge.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.

unknown carpet spots & stains

[Back to top]

  1. Apply a dry cleaning solvent, using a damp towel.
  2. Blot-don't rub.
  3. Repeat solvent application as above.
  4. Blot-don't rub.
  5. Apply water with damp towel.
  6. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

OR:

  1. Scrape or blot up excess spill.
  2. Apply detergent solution (see "Cleaning Solutions"), use damp towel.
  3. Blot-don't rub.
  4. Apply white vinegar (undiluted), using a damp towel.
  5. Blot-don't rub.
  6. Apply pre-soak solution (see "Cleaning Solutions") using a damp towel.
  7. Blot again. Finish by weighing down a half-inch thick pad of white paper towels to absorb all the moisture. Leave overnight if necessary.

Cleaning Solutions to have on hand:

  1. Detergent: Mix 1/2 teaspoon clear dishwashing detergent with one cup of warm (not hot) water.
  2. Pre-soak Solution: Mix 1 teaspoon enzyme laundry detergent (such as Axion, Biz, or others) with one cup of water.
  3. Dry Powder Cleaner: Use powdered carpet cleaners.
  4. Dry Cleaning Solvent: Non-oily, non-caustic type sold as spot removal for garments. Caution: May be flammable.

* Note: Not all carpet fibers react the same way when treated for stains. Before proceeding with any of the preceding cleaning procedures, we recommend you contact the appropriate fiber company for their suggested maintenance guidelines. Failure to follow these guidelines may void your warranty. For more information, please contact Dalene Flooring.

Note: If your carpet has an Ultra 25a Warranty, you must call 3M directly prior to treating any stain. Failure to do this will void your warranty.


For over 60 years, Dalene Flooring has been providing quality flooring systems and exceptional value.
From Hardwood Floors and Carpet, to Ceramic Tile, Vinyl Flooring and Laminate Flooring, as well as Marble and Granite, Dalene Flooring has every floor covering option you are looking for. Dalene Flooring offers an unsurpassed selection of floor covering options from all of the names you know and Trust; Stainmaster, Karastan, Armstrong, Shaw, Mohawk, Dal Tile, and many others. In addition, Dalene Flooring has been selected as the only Armstrong Elite Dealer as well as the Only Stainmaster Flooring Center in all of Connecticut.

What does this mean to you? Our sales consultants and installation professionals receive exceptional training directly from the manufacturers and because of these partnerships, Dalene Flooring offers exclusive warranties only available from Armstrong Elite and Stainmaster Flooring Center Dealers.

© 2012 DaleneFlooring.com All Rights Reserved.