ceramic/stone care & maintenance
Ceramic tile, for the most part, requires minimal attention. Glazed and unglazed tile, under normal residential situations, can be cleaned using clean water and a tile cleaner recommended by the manufacturer. Always follow up with a rinse of clean water to completely remove all the cleaning solution. Regular maintenance is recommended to avoid build-up of dirt, residue, grease, soap, detergents, or other external contaminants.
Improper care of ceramic tile using improper cleaning products can result in a build-up on the surface, causing the tile to be slippery. Wax cleaners and oil-based detergents may decrease the slip resistance and are not recommended for use on your ceramic tile.
Shop now to view/order our recommended cleaning products, mops and furniture protectors for ceramic floors. They are available online or in-store for purchase.
CERAMIC TILE CARE
For basic cleaning, the following procedures are recommended in ceramic tile care:
General Damp Mopping
- Sweep or vacuum surface
- Mix water with tile and grout cleaner per manufacturer's instructions and apply to surface
- Allow solution to sit for three to five minutes
- Agitate with sponge or mop
- Mop up solution
- Rinse mop and change cleaning solution at least every 500 square feet
- Rinse thoroughly with clean water
- Dry mop floor to remove moisture or pick up residue with a wet-vac
- Wipe the floor dry
General cleaning with Armstrong or Bona Products
- Sweep or vacuum surface
- Apply cleaner as stated on container
- Follow steps per cleaning manufacturers recommendations
Shop now for Dalene Flooring recommended ceramic tile cleaning products and mops.
ceramic tile maintenance
For tile with coarse or abrasive type surfaces, maintenance will need to be performed more frequently. Agitation will need to be more vigorous and water changes more frequent. Proper cleaning of these types of tile is necessary for the slip resistance value to be maintained. Grease or water accumulation may create slippery conditions. Be careful to avoid introduction of grease from dirty mops to your floor surface while cleaning.
Because the grout on your ceramic tile needs time to thoroughly dry after installation, we recommend you do not scrub or wash your ceramic tile for five days after installation. We also recommend protecting your floor against abrasive dirt at entrances to buildings with dirt catching floor mats.
